Crosby® G-2140 / S-2140 Alloy Bolt Type Anchor Shackles
MultiSec’s Crosby® G-2140 meets the performance
requirements of Federal Specification RR-C-271G.
Bolt-Type Shackles can be used in any application where round pin or screw pin shackles are used. In addition, they are recommended for permanent or long term installations and where the load may slide on the shackle pin causing the pin to rotate. The bolt-type shackle’s secondary securement system, utilizing a nut and cotter, eliminates the requirement to tighten pin before each lift or movement of load.
Look for the Red Pin®, the mark of genuine Crosby quality.
- Quenched and Tempered.
- Alloy bows, Alloy bolts.
- Forged Alloy Steel 2 thru 200 metric tons. Cast Alloy Steel 250 thru 400 metric tons.
Meets performance requirements of Grade 8 shackles. - Working Load Limit is permanently shown on every shackle.
- 30, 40, 55, and 85 metric ton shackle bows are available galvanized or self coloured
with bolts that are galvanized and painted red. - Sizes 3/8 inch and below are mechanically galvanized.
- 120, 150, 175 metric ton shackle bows are hot-dip galvanized; bolts are Dimetcoted
and painted red. - 400 metric ton shackle bows are Dimetcoted; bolts are Dimetcoted and painted red.
- Sizes 1-1/2 and larger are RFID EQUIPPED.
- Approved for use at -40° C (-40° F) to 204° C (400° F).
- Shackles are Quenched and Tempered and can meet DNV impact requirements of
42 Joules (31 ft•lbf) at -20° C (-4° F). - All sizes are individually proof tested to 2.0 times the Working Load Limit.
- Shackles 200 metric tons and larger are provided as follows.
• Serialized bolt and bow - Material certification (chemical
- Magnetic particle inspected.
- Certification must be requested at time of order.
- Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor, proof load and
temperature requirements. 2140 shackles meet other critical performance requirements including impact properties
and material traceability, not addressed by ASME B30.26. - Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Liftin
Appliances. - Certificates available when requested at time of order and ma include additional charges.
The Crosby Shackle Range
If you need help or have any questions, please do not hesitate to contact our sales team for guidance.
MORE OF OUR PRODUCTS
